Uniden UBC-RH96 사용자 설명서

guides to keep the cable correctly positioned. Then,

route the remainder of the cable toward the location of

your target scanner. When doing so, be sure to avoid

sharp metal edges of your vehicle’s body, or other

possible hazards. Be sure the cable does not interfere

with controls, operation of the vehicle, or passenger

safety. Insert the cable’s special connector in the front

port of the UBCD996T mobile scanner, or the side port

of the UBCD396T handy scanner.

Data Port Cable — Firmware Updates

The Remote Head has a data port (see UBC-RH96

Connections)so you can update the fi rmware using the

data transfer cable provided with your scanner. Con-

nect the data transfer cable to this port on the bottom

of the Remote Head. Connect the other end to the DB9

serial port on your PC. This is the only purpose of this

connection.

Important:

For best operation, be sure your scanner always has the

latest fi rmware. Visit www.uniden.com.au (Australian

model) or www.uniden.co.nz (New Zealand model)

to verify that your scanner has the most up-to-date

fi rmware.

UBC-RH96 Digital Scanner OM.indd12 12

10/9/07 4:16:00 PM