Sharp MX-FX13 사용자 설명서
60
TRANSMISSION USING F-CODES
F-code confidential transmission
1
Follow steps 1 to 4 of "BASIC
PROCEDURE FOR SENDING FAXES"
(page 17) and then follow the steps
below.
PROCEDURE FOR SENDING FAXES"
(page 17) and then follow the steps
below.
2
Press the [SPECIAL FUNCTION] key.
When the [SPECIAL
FUNCTION] key is pressed, the
special function selection
screen appears.
FUNCTION] key is pressed, the
special function selection
screen appears.
3
Select "SENDING OPTIONS" with the
[
[
] or [
] key.
4
Press the [OK] key.
5
Select "SUB ADDRESS TX" with the
[
[
] or [
] key.
6
Press the [OK] key.
7
Enter the fax number of the other
machine with the numeric keys, or
press a Rapid key, or dial a Speed Dial
number (a group key cannot be used).
machine with the numeric keys, or
press a Rapid key, or dial a Speed Dial
number (a group key cannot be used).
To clear a mistake when
entering a number with the
numeric keys, press the [C] key
to clear one digit at a time.
entering a number with the
numeric keys, press the [C] key
to clear one digit at a time.
A destination selected with a Rapid key or Speed Dial
number is indicated by an icon and a number. To clear
an entry, press the [C] key.
number is indicated by an icon and a number. To clear
an entry, press the [C] key.
8
Press the [OK] key.
9
Enter the sub-address (maximum 20
digits) with the numeric keys.
digits) with the numeric keys.
• Characters that can be entered are numbers, "#",
and spaces. However, the initial character cannot be
a space.
a space.
• If you make a mistake, press the [C] key and re-enter
the correct digit(s).
• If you specified a Rapid key or Speed Dial number in
step 7 that has a sub-address programmed, the
sub-address will appear. Go to the next step without
entering a sub-address.
sub-address will appear. Go to the next step without
entering a sub-address.
10
Press the [OK] key.
11
Enter the passcode (maximum 20
digits) with the numeric keys.
digits) with the numeric keys.
• Characters that can be entered are numbers, "#",
and spaces. However, the initial character cannot be
a space.
a space.
• If you make a mistake, press the [C] key and re-enter
the correct digit(s).
• If you specified a Rapid key or Speed Dial number in
step 7 that has a passcode programmed, the
passcode will appear. Go to the next step without
entering the passcode.
passcode will appear. Go to the next step without
entering the passcode.
12
Press the [OK] key.
13
Press the [START] key (
).
• Scanning begins.
• If you are scanning from the document glass and
• If you are scanning from the document glass and
have another page to scan, change pages and press
the [START] key (
the [START] key (
). Repeat until all pages have
been scanned and then press the
key.
EXPOSURE
COLOUR MODE
PAPER SE
RESOLUT
RESOLUT
COPY
SCAN
SCAN
SPECIAL
FUNCTION
LINE
DATA
DATA
ON LINE
PQ
ACC
LEX SCAN
LEX SCAN
LEX SCAN
DED COPY
SPECIAL FUNCTION
FAX PRINT HOLD
TIMER MODE
FAX PRINT HOLD
TIMER MODE
SENDING OPTIONS
SENDING OPTIONS
SERIAL POLLING
SERIAL POLLING
SUB ADDRESS TX
SUB ADD POLLING
WXYZ
36
37
38
31
32
33
26
27
28
A
B
C
F
G
H
WXYZ
WXYZ
MNO
WXYZ
@.-_
AD-END