PSC QS2500 사용자 설명서

If your application accepts only keypad numeric code, use 

setting 

 to make the QS2500 output code as numeric-keypad presses 

when it reads digits. If you use setting 

, the scanner will send the three 

digit ACSCII number for all data using the Alt and numeric keypad key-
codes. Setting 

 prevents the caps Lock from affecting scanner data.

By selecting Caps Lock or No Caps Lock, the QS2500 can get 

Caps Lock status.

All PCs check the keyboard status during the power-

on selftest. It is recommended that you enable this function if you are 
working without a keyboard installation. It simulates keyboard timing and 
passes the keyboard status to the PC during power-on.

This delay is inserted after each data character trans-

mitted. If the transmission speed is too high, the system may not be able 
to receive all characters. You may need to adjust the delay to make the sys-
tem work properly.

This is a delay timer between bar code data out-

puts. The feature is used to transfer continually with shorter bar code data 
or multifield scanning.