Uniden UBC396T 사용자 설명서

64

• See“Setting the Motorola Status Bit (Motorola Sys-

tems Only)” on Page 78

• See “Setting the End Code Operation (Motorola 

Systems Only)” on Page 79

• See “Setting I-Call (Motorola and EDACS Sys-

tems Only)” on Page 79

• See “Setting Emergency Alert (Motorola and 

EDACS Systems Only)” on Page 80

• See “Adjusting the P25 Level (Motorola and Con-

ventional Systems Only)” on Page 81

• See “Setting Control-Channel Only (Motorola Sys-

tems Only)” on Page 80

• See “Setting System Lockout” on Page 75

• See “Reviewing Locked Out Frequencies” on 

Page 107

• See “Setting System Attenuation (Trunked Sys-

tems Only)” on Page 83

• See “Deleting Systems” on Page 83

• See “Copying Systems” on Page 83

• See “Setting System Frequencies” on Page 64

• See “Entering/Editing Motorola Channel Groups” 

on Page 66

 

 Program System 

  

 

Select the system 

   

 

Set Frequencies 

  

Input a system frequency, then press the scroll control.

To enter additional frequencies, press 

, use the 

scroll control to select New Frequency, then repeat 
the above.

Note: If you select Control Channel Only mode (see 
“Setting Control-Channel Only (Motorola Systems 
Only)” on Page 80), you only need to enter the 
frequency(s) that can be assigned as the control 
channel. Most frequency lists usually indicate which of