Uniden UBC396T 사용자 설명서
67
Programming Radio Systems
Enter a talk group ID
Note: You can enter I-Calls by pressing then the
I-Call number. You can enter the I-Call wild card by
pressing
I-Call number. You can enter the I-Call wild card by
pressing
then
0.
Refer to the appropriate section to change a
channel setting:
channel setting:
• See “Adjusting the P25 Level (Motorola and Con-
ventional Systems Only)” on Page 81
• See “Editing the Channel Name” on Page 86
• See “Editing the Talk Group ID (Trunked Channels
Only)” on Page 88
• See “Setting Channel Lockout” on Page 91
• See “Deleting Channels” on Page 92
• See “Copying/Pasting Channels” on Page 92
To program another channel within the same group,
press
press
, then repeat the above. To create another
channel group and enter more channels, press
three times, then proceed from “Entering/Editing
Motorola Channel Groups” on Page 66.
Motorola Channel Groups” on Page 66.
Programming EDACS Systems
Program System
New System
EDCS
Confirm? Yes=”E” / No=”.”
Next, rotate the scroll control to select the type of
EDACS system you want to program, then briefly
press the scroll control to select it.
EDACS system you want to program, then briefly
press the scroll control to select it.
• WIDE - Use for wideband EDACS systems
• NARROW - Use for narrowband EDACS systems
• SCAT - Use for EDACS SCAT (Single Channel
Autonomous Trunking)
Confirm? Yes=”E” / No=”.”
The scanner creates an empty EDACS system, with a
default name of System n E.
default name of System n E.
Menu
Menu
Menu