Uniden UBC396T 사용자 설명서
83
Programming/Editing Optional Settings
Setting System Attenuation
(Trunked Systems Only)
(Trunked Systems Only)
Program System
Select the system
Set Attenuator
This setting controls whether the attenuator will be on
or off for the current system. Select your setting then
press E.
or off for the current system. Select your setting then
press E.
Off
- the attenuator is off.
On
- system frequencies are attenuated by about 18
dB.
Notes:
• Turn on this setting if you are near strong signal
sources. Attenuation can help reduce interference
and desensitization that strong signals create.
and desensitization that strong signals create.
• You can also turn this setting on or off by holding
on a trunked system, then pressing
+ E.
Deleting Systems
Program System
Select the system
Delete System
The scanner prompts you to confirm deletion.
To confirm, press E. To cancel, press .
To confirm, press E. To cancel, press .
Notes:
• Deleted systems cannot be restored. You must
re-enter them.
• You cannot restore preloaded systems.
Copying Systems
To copy a system including all settings, groups, and
channels:
channels:
Menu
Func
Menu