Nikon COOLPIXP7100 사용자 설명서
Te
chni
chni
cal
Note
Note
s and
In
de
x
de
x
F7
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Refer to the page numbers in the right-most column for more information.
• See “Error Messages” (
below before consulting your retailer or Nikon-authorized service representative.
Refer to the page numbers in the right-most column for more information.
• See “Error Messages” (
E107) for more information.
Power, Display, Settings Issues
Problem
Cause/Solution
A
Camera turns off
without warning.
without warning.
• Battery is exhausted.
• If no operations are performed for a while, camera has
• If no operations are performed for a while, camera has
turned off automatically by auto off to save power.
• Inside of the camera has become hot. Leave the camera
off until the inside of the camera has cooled.
• At low temperatures, the camera and the battery may not
function normally.
–
Monitor is blank.
• Camera is off.
• Battery is exhausted.
• Standby mode for saving power: Press the power switch,
• Battery is exhausted.
• Standby mode for saving power: Press the power switch,
shutter-release button or the
c button, or rotate the
mode dial.
• Monitor is turned off. Press the
x button to turn it on.
• Camera and computer are connected via USB cable.
• Camera and TV are connected via A/V cable or HDMI
• Camera and TV are connected via A/V cable or HDMI
cable.
• Interval timer shooting in progress.
Monitor is hard to
see.
see.
• Ambient lighting too bright: Use viewfinder or move to
darker location.
• Adjust monitor brightness.
• Monitor is dirty. Clean monitor.
• Use monitor brightness boost.
• Monitor is dirty. Clean monitor.
• Use monitor brightness boost.
The viewfinder is
hard to read.
hard to read.
Adjust diopter adjustment control.
Date and time of
recording are not
correct.
recording are not
correct.
• If the camera clock has not been set (“Date not set”
indicator blinks during shooting), recording date and
time is recorded as “01/01/11 00:00.” Set the correct date
and time using Time zone and date in the setup menu.
time is recorded as “01/01/11 00:00.” Set the correct date
and time using Time zone and date in the setup menu.
• The camera clock is not as accurate as a normal clock,
such as watches. Check camera clock regularly against
more accurate timepieces and reset as required.
more accurate timepieces and reset as required.
No information
displayed in
monitor.
displayed in
monitor.
Shooting information and photo information may be
hidden. Press the
hidden. Press the
x button until shooting information or
photo information is displayed.