Panasonic W1014HM0-YI 사용자 설명서
– 54 –
Chapter 6 Audio recording — Preparing for audio input
Preparing for audio input
Prepare the camera for connecting audio input devices.
Using front microphone
Microphones such as the stereo microphone kit AJ-MC900G (optional) can be mounted.
a
b
Fig. 1
Fig. 2
Fig. 3
Fig. 4
1
Remove the screws at the microphone holder mounting position and attach the microphone holder AJ-MH800G (optional). (Fig. 1)
2
Attach the microphone and tighten the clamping screw (a). (Fig. 2)
Mount with the UP indication on the microphone facing up.
3
Loosen the lock lever (b), adjust the angle of the microphone, and tighten the lock lever. (Fig. 3)
4
Connect the microphone cable to the <MIC IN> terminal on the camera module. (Fig. 4)
5
According to the audio channel to be recorded, select [FRONT] in control panel audio input.
Setting the audio input using the control panel
1
Press the <HOME> button to display the HOME screen.
2
From [SYSTEM] → [AUDIO] → [VR/IN/OUT], select [IN].
3
Select [FRONT] in [CH1/2 IN].
[CH3/4 IN] is automatically set to [REAR].