TP-LINK NC200 사용자 설명서
NC200
Cloud Camera, 300Mbps Wi-Fi
).
Note:
If you have not registered for any of the listed DDNS servers, please select one and click
Go to
register…and follow the instructions provided on the official website to register.
Username: Enter the username that is used to log into DDNS.
Password: Enter the password that is used to log into DDNS.
Domain Name: Enter the domain name that is applied to your camera and used to access
your camera.
your camera.
Connection Status: Displays the current status of DDNS connection.
Click
Login. After logging in successfully, click Save to save and enable the settings.
3.4.7 Advanced → Video
On this page, you can configure the video settings for your camera.
Frame Rate: Select the frame rate to use for the video stream from the drop-down list. Higher
settings offer better quality, but will require more bandwidth to stream.
settings offer better quality, but will require more bandwidth to stream.
Image Quality: Select one of the three levels of image quality from the drop-down list: High,
Medium, and Low. Higher settings offer better quality, but will require more bandwidth to
stream.
Medium, and Low. Higher settings offer better quality, but will require more bandwidth to
stream.
Backlight Compensation: If enabled, this feature will compensate for bright backgrounds so
foreground objects aren't silhouetted. It is enabled by default.
foreground objects aren't silhouetted. It is enabled by default.
Light Frequency: Select the frequency used by your lighting and power to help reduce image
flicker. The default setting is auto, which is recommended.
flicker. The default setting is auto, which is recommended.
26