Siemens TP177B 사용자 설명서
Automation and Drives - SCE
T I A Training Document
Page 87 of 129
Module
F6
Issued: 02/2008
Operator Control with WinCC flexible 2005
Preface Installation Project Description Step7 Project HMI Station WinCC flexible Project Messages Recipes User Management
8.2
Configuring the Display and Operator Objects in the Pictures “Tank2“ and “Tank3“
The picture for Tank2 and Tank3 is structured exactly like the picture for Tank1.
In the picture “Tank2“, the level of the tank and the valve function are to be displayed in the color
green and the variables for Tank2 are used; for example, “INHALT_T2“ (Content Tank2).
In the picture “Tank3“, the level of the tank and the valve function are to be displayed in the color
blue and the variables for Tank3 are used; for example, “INHALT_T3“.
Configure the tank pictures by either repeating the steps described in 8.1 and using a different color
and variable assignment, or by copying the objects of the picture “Tank1“ and inserting them in the
picture “Tank2“ and “Tank3“.
You can highlight and copy several objects with SHIFT+mouse click.
Then switch to the picture “Tank2“ and “Tank3“ and insert the objects.
After you inserted the objects, only the color assignments and the variables have to be changed. For
the bars and the valves, the size and the position have to be adjusted to the background graphic in
addition.
Check the generated variables and test the objects of the pictures in runtime.
In the picture “Tank2“, the level of the tank and the valve function are to be displayed in the color
green and the variables for Tank2 are used; for example, “INHALT_T2“ (Content Tank2).
In the picture “Tank3“, the level of the tank and the valve function are to be displayed in the color
blue and the variables for Tank3 are used; for example, “INHALT_T3“.
Configure the tank pictures by either repeating the steps described in 8.1 and using a different color
and variable assignment, or by copying the objects of the picture “Tank1“ and inserting them in the
picture “Tank2“ and “Tank3“.
You can highlight and copy several objects with SHIFT+mouse click.
Then switch to the picture “Tank2“ and “Tank3“ and insert the objects.
After you inserted the objects, only the color assignments and the variables have to be changed. For
the bars and the valves, the size and the position have to be adjusted to the background graphic in
addition.
Check the generated variables and test the objects of the pictures in runtime.
OUTFLOW_T1
DB1.man_outflow_tank
DB1.man_inflow_tank1
CONTENT_T1