Cisco Systems 3750E 사용자 설명서
36-13
Catalyst 3750-E and 3560-E Switch Software Configuration Guide
OL-9775-02
Chapter 36 Configuring QoS
Understanding QoS
Queueing and Scheduling Overview
The switch has queues at specific points to help prevent congestion as shown in
and
Figure 36-6
Ingress and Egress Queue Location on Catalyst 3750-E Switches
Figure 36-7
Ingress and Egress Queue Location on Catalyst 3560-E Switches
Because the total inbound bandwidth of all ports can exceed the bandwidth of the stack or internal ring,
ingress queues are located after the packet is classified, policed, and marked and before packets are
forwarded into the switch fabric. Because multiple ingress ports can simultaneously send packets to an
egress port and cause congestion, outbound queues are located after the stack or internal ring.
ingress queues are located after the packet is classified, policed, and marked and before packets are
forwarded into the switch fabric. Because multiple ingress ports can simultaneously send packets to an
egress port and cause congestion, outbound queues are located after the stack or internal ring.
Marker
Policer
Marker
Policer
Marker
Ingress
queues
queues
Stack ring
Egress
queues
Policer
Marker
Policer
Classify
Traffic
SRR
SRR
86691
Marker
Policer
Marker
Policer
Marker
Ingress
queues
queues
Internal
ring
Egress
queues
Policer
Marker
Policer
Classify
Traffic
SRR
SRR
90563