U-Line CLR2160 사용자 설명서

CLR2160, CLRCO2175

Unit runs but produces very little ice.

Dirty condenser coils

Clean the condenser (See MAINTENANCE; CONDENSER 
CLEANING).

High air temperature around unit

Surrounding air temperature of over 90°F. Low ice 
production at high temperatures is normal.

Scale and mineral buildup in unit

Run unit through self cleaning cycle (See 
MAINTENANCE; ICE MAKER: SELF CLEANING CYCLE.

Inadequate airflow at the front of 
the unit

Remove items blocking airflow.

Cleaning Cycle recently performed

Allow unit to reach the set temperature to produce ice 
normally.

Poor ice quality (soft or unclear)

Unit is not level.

Level unit (See MAINTENANCE; LEVELING).

Poor incoming water quality

Consult a qualified plumber to test the water quality 
and recommend appropriate treatment.

Ice-making system is dirty.

Run unit through self cleaning cycle (See 
MAINTENANCE; ICE MAKER: SELF CLEANING CYCLE).

Unit produces shallow or incomplete 
cubes, or the ice fill pattern on the 
evaporator is incomplete.

Low water level

Check to see that overflow tube is fully seated.

Hot incoming water

Connect the unit to a cold water supply.

Incorrect incoming water pressure

Water pressure must be 20-120 psi.

Unit is not level.

Level unit (See MAINTENANCE; LEVELING).

Ice is slow to release or does not 
release from the evaporator.

Ice-making system is dirty.

Run unit through self cleaning cycle (See 
MAINTENANCE; ICE MAKER: SELF CLEANING CYCLE).

Unit is not level.

Level the unit (See MAINTENANCE: LEVELING).

Low air temperature around unit

Surrounding air temperature must be at least 50°F.

Ice storage bin full of water

Obstructed drain

Check to see that storage bin drain opening is free from 
obstruction and debris.

Water leaking from under the unit

Supply line leaking

Tighten connection as required.

Fill tube leaking

Check connection at water valve outlet.

Bin drain leaking

Check integrity of bin drain hose and clamp.