DELL MD3220 사용자 설명서

Configuration: Premium Feature—Virtual Disk Copy

You can use the Copy Manager to select the rate at which a virtual disk copy 

completes for a selected copy pair. You can change the copy priority for a copy 

pair at any of these times:

• Before the virtual disk copy begins
• While the virtual disk copy has a status of In Progress
• When you re-create a virtual disk copy

To set copy priority:

1 In the AMW, select Virtual Disk Copy Copy Manager.

The 

Copy Manager window is displayed.

2 In the table, select one or more copy pairs.
3 Select Change Copy Priority.

The 

Change Copy Priority window is displayed.

4 In the Copy priority area, select the appropriate copy priority, depending 

on your system performance needs. 

There are five copy priority rates available: lowest, low, medium, high, 

and highest. If the copy priority is set at the lowest rate, I/O activity is 

prioritized, and the virtual disk copy takes longer.

You can stop a virtual disk copy operation that has an In Progress status, a 

Pending status, or a Failed status. Stopping a virtual disk copy that has a 

Failed status clears the Needs Attention status displayed for the storage array.
Keep these guidelines in mind when you stop a virtual disk copy:

• To use this option, select only one copy pair in the Copy Manager.
• When the virtual disk copy is stopped, all of the mapped hosts have write 

access to the source virtual disk. If data is written to the source virtual disk, 

the data on the target virtual disk no longer matches the data on the 

source virtual disk.

book.book  Page 161  Monday, June 21, 2010  11:00 AM