DELL MD3220 사용자 설명서
Management: Firmware Downloads
185
Downloading MD1200 Series Expansion Module
EMM Firmware
NOTE:
Do not make any configuration changes to the storage array while you are
downloading the expansion enclosure EMM firmware. Doing so could cause the
firmware download to fail, damage the storage array, or cause loss of data
accessibility.
NOTE:
Due to a limitation with Linux, expansion enclosure EMM firmware updates
must be performed using out-of-band management only. Failure to do so may result
in the host server becoming unresponsive, and it may require a reboot.
You can transfer a downloadable firmware file to the expansion enclosure
EMM in the expansion enclosures attached to the storage array.
CAUTION:
Risk of possible loss of data or risk of damage to the storage array –
Downloading the expansion enclosure EMM firmware incorrectly could result in
loss of data or damage to the storage array. Perform downloads only under the
guidance of your Technical Support representative.
loss of data or damage to the storage array. Perform downloads only under the
guidance of your Technical Support representative.
CAUTION:
Risk of making expansion enclosure EMM unusable – Do not make
any configuration changes to the storage array while downloading expansion
enclosure EMM firmware. Doing so could cause the firmware download to fail
and make the selected expansion enclosure unusable.
enclosure EMM firmware. Doing so could cause the firmware download to fail
and make the selected expansion enclosure unusable.
1 Perform one of these actions:
• In the AMW, select
Advanced Maintenance Download EMM
Firmware.
• Select the
Support tab, and click Download Firmware. In the dialog
that appears, select the
EMM firmware, and click OK.
The
Download Environmental (EMM) Firmware dialog appears.
2 In the Select enclosures area, either select each expansion enclosure to
which you want to download firmware, or select the
Select All to select all
of the expansion enclosures in the storage array.
Each selected expansion enclosure should have the same product ID.
Each selected expansion enclosure should have the same product ID.
3 Click Select File.
The Select Environmental (EMM) Card Firmware File dialog appears.
4 Select the file to download, and click OK.
5 Click Start.
5 Click Start.
book.book Page 185 Monday, June 21, 2010 11:00 AM