DELL MD3220 사용자 설명서
212
Management: Installing Array Components
Installing the Backplane
1 Align the holes on the backplane with the holes on the array.
2 Tighten the captive screw to secure the backplane to the chassis.
2 Tighten the captive screw to secure the backplane to the chassis.
See Figure 15-16 for PowerVault MD3200 or Figure 15-17 for
PowerVault MD3220.
3 Replace the screws that secure the backplane to the chassis.
See Figure 15-16 for PowerVault MD3200 or Figure 15-17 for
PowerVault MD3220.
4 Align the slots on the RAID controller module /power supply cage with the
tabs on the chassis. See Figure 15-15.
5 Push the RAID controller module /power supply cage toward the front of
the array.
6 Replace the screws that secure the RAID controller module /power supply
cage to the chassis.
7 Replace the control panel. See "Installing the Control Panel" on page 208.
8 Replace the power supply/cooling fan modules. See "Installing a Power
8 Replace the power supply/cooling fan modules. See "Installing a Power
9 Replace the hard drives. See "Installing a Hard Drive" on page 194.
10 Connect all the cables to the array.
11 Turn on the array and the host server.
11 Turn on the array and the host server.
book.book Page 212 Monday, June 21, 2010 11:00 AM