DELL MD3220 사용자 설명서

Configuration: About Your Storage Array

The host agent must be restarted before in-band management 

communication can be established. See "Starting or Restarting the Host 

3 Click Add.
4 Use one of these methods to name a storage array:

• In the EMW, select the 

Setup tab, and select Name/Rename Storage 

Arrays.

• In the AMW, select the 

Setup tab, and select Rename Storage Array.

• In the EMW right-click the icon corresponding to the array and select 

Rename.

A list of initial setup tasks is displayed on the Setup tab in the AMW. The list 

of initial setup tasks shows you how to set up a storage array. Using the steps 

outlined in the Initial Setup Tasks Area, ensures that the basic setup steps are 

completed properly. 
Use the Initial Setup Tasks list the first time that you set up a storage array to 

perform these tasks:

• Locate the storage array—Find the physical location of the storage array on 

your network by turning on the unit identify LEDs. The storage array can 

be identified with a label.

• Give a new name to the storage array—Use a unique name that identifies 

each storage array.

• Set a storage array password—Configure the storage array with a password 

to protect it from unauthorized access. MDSM prompts for the password 

when an attempt is made to change the storage array configuration, such 

as when a virtual disk is created or deleted. 

• Configure the storage array—Create disk groups, virtual disks, and hot 

spare physical disks by using the Automatic configuration method or the 

Manual configuration method. For more information, see the PowerVault 

Modular Disk Storage Manager online help topics.

• Map Virtual Disks—Map virtual disks to hosts or host groups.

book.book  Page 66  Monday, June 21, 2010  11:00 AM