DELL MD3220 사용자 설명서

Configuration: About Your Storage Array

You can configure each storage array with a password to protect it from 

unauthorized access. MDSM prompts for the password when an attempt is 

made to change the storage array configuration, such as, when a virtual disk is 

created or deleted. View operations do not change the storage array 

configuration and do not require a password. You can create a new password 

or change an existing password. 

It is recommended that you use a long password with at least 15 

alphanumeric characters to increase security.

To set a new password or change an existing password:

1 Select the relevant storage array and navigate to the AMW for that storage 

array. See "Array Management Window" on page 61.
The AMW for the selected storage array is displayed.

2 In the AMW, perform one of these actions:

• Select the storage array in the 

Logical pane, and then select Storage 

Array Set Password.

• Select the 

Setup tab, and then click Set a Storage Array Password.

• In the AMW, select the 

Logical tab, right-click and select Set 

The Set Password dialog appears.

3 If you are resetting the password, type the Current password.

If you are setting the password for the first time, leave the Current 

password blank.

4 Type the New password.
5 Re-type the new password in Confirm new password. 

The password in Confirm new password and New password must be 

exactly the same.

6 Click OK.

You are not prompted for a password when you attempt to change the 

storage array configuration in the current management session.

book.book  Page 69  Monday, June 21, 2010  11:00 AM