DELL MD3220 사용자 설명서
82
Configuration: Event Monitor
Enabling or Disabling the Event Monitor
You can enable or disable the event monitor at any time.
Disable the event monitor if you do not want the system to send alert
Disable the event monitor if you do not want the system to send alert
notifications. If you are running the event monitor on multiple systems,
disabling the event monitor on all but one system prevents the sending of
duplicate messages.
NOTE:
It is recommended that you configure the event monitor to start by default
on a management station that runs 24 hours a day.
Windows
To enable or disable the event monitor:
1 Click Start Settings Control Panel Administrative Tools
Services.
or
Click
or
Click
Start Administrative Tools Services.
2 From the list of services, select Modular Disk Storage Manager Event
Monitor.
3 Select Action Properties.
4 To enable the event monitor, in the Service Status area, click Start.
5 To disable the event monitor, in the Service Status area, click Stop.
4 To enable the event monitor, in the Service Status area, click Start.
5 To disable the event monitor, in the Service Status area, click Stop.
Linux
To enable the event monitor, at the command prompt, type SMmonitor
start and press <Enter>. When the program startup begins, the system
start and press <Enter>. When the program startup begins, the system
displays the following message:
SMmonitor started.
To disable the event monitor, start terminal emulation application (console
SMmonitor started.
To disable the event monitor, start terminal emulation application (console
ox xterm) and at the command prompt, type SMmonitor stop and press
<Enter>. When the program shutdown is complete, the system displays the
following message:
Stopping Monitor process.
Stopping Monitor process.
book.book Page 82 Monday, June 21, 2010 11:00 AM