Festool ETS 125 EQ 사용자 설명서

5

 Always secure the workpiece in 

such a manner that it cannot move while being 
sanded. 

 Never overload the tool by using too 

much pressure! The best sanding results are 
achieved when applying moderate pressure. 

The sanding performance and quality depend 
mainly on the choice of the right sanding material. 
Festool offers the appropriate sanding material for 
all applications (see Festool catalogue). 

We recommend the following settings on the 
rotary control (2.1) for electronic machines:

5 - 6
• sanding with max. drive
• sanding old paint
• sanding wood and veneer prior to painting
• interim sanding of paint on surfaces

4 - 5
• sanding of thinly applied primer
• sanding of wood with sanding vlies
• sanding edges on wooden parts
• smoothing primed wooden surfaces.

3 - 4
• sanding full wooden and veneer edges
• sanding in the grooves/rebates of windows and 

doors

• interim paint sanding on edges
• pre-sanding natural wood windows with sanding 

vlies

• smoothing wood surfaces with sanding felt prior 

to staining

• rubbing down stained surfaces with sanding 

vlies

• rubbing down or removing excess lime paste 

with sanding vlies

2 - 3
• interim paint sanding on stained surfaces
• cleaning natural wood window grooves with 

sanding felt

1 - 2
• sanding stained edges
• sanding thermoplastic synthetics

 Always remove the plug from the 

mains supply socket before carrying out any work 
on the machine! 

The cooling air vents on the motor housing must 
always be free of blockages and clean to ensure 
air circulation. Any maintenance or repair work 
requiring the motor housing to be opened may 

only be carried out by an authorised service 
workshop. 

The sanding base is braked by a collar (6.1) in 
order to prevent any uncontrolled excessive speed 
of the sanding base. 

6.1

Because the collar wears down in the course of 
time, it has to be replaced by a new one (order 
no. 489 190) as soon as there is any reduction in 
the braking effect.

 For safety reasons, only use original 

Festool accessories and tools!

The accessory and tool order number can be 
found in the Festool catalog or on the Internet 
under www.festool-usa.com.

Many Festool products are shipped in a unique 
system container, called "Systainer". This provides 
protection and storage for the tool and acces-
sories. The Systainers are stackable and can be 
interlocked together. They also can be interlocked 
atop Festool CT dust extractors. 

7.1

7.2

7.3

- Place one systainer on top of the other. 
- Release all four latches on the lower systainer 

by pulling back at their top edges (7.1). 

- Slide all four latches upward (7.2). 
- Snap all four latches back to their fl at position 

(7.3) so they engage the stacking tabs of the 
upper systainer.