Festool DTS 400 Q 사용자 설명서
3
Symbols
V volts
A amperes
Hz hertz
W watt
~
A amperes
Hz hertz
W watt
~
alternating current
n
0
no
load
speed
Class II Construction
rpm revolutions
per
minute
spm
strokes per minute
Intended use
The sanders are designed for sanding wood, plas-
tic, composite materials, paint / varnish, fi lling
material and similar materials. Metal and materials
with an asbestos content must not be processed
with these tools.
tic, composite materials, paint / varnish, fi lling
material and similar materials. Metal and materials
with an asbestos content must not be processed
with these tools.
The machine is particularly suitable for processing
smaller surfaces and overhead work because of
its size, its weight and its output.
smaller surfaces and overhead work because of
its size, its weight and its output.
The machines must not be damp nor operated
in a damp environment for electrical safety rea-
in a damp environment for electrical safety rea-
sons. The machines may only be used for dry
sanding.
sanding.
The user bears sole responsibility for
any da-mage or accidents resulting from incor-
rect use.
rect use.
Electrical connection
and operation
The mains voltage must correspond with the volt-
age on the rating plate!
age on the rating plate!
See the following Fig. for connecting or dis-
connecting the power cord of the tool.
connecting the power cord of the tool.
Always switch the machine off before
connecting or disconnecting the power cable!
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool
bits etc., in accordance with these instruc-
tions and in the manner intended for the
particular type of power tool, taking into
account the working conditions and the
work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
bits etc., in accordance with these instruc-
tions and in the manner intended for the
particular type of power tool, taking into
account the working conditions and the
work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
5) Service
a) Have your power tool serviced by a quali-
fi ed repair person using only identical re-
placement parts. This will ensure that the safety
of the power tool is maintained.
fi ed repair person using only identical re-
placement parts. This will ensure that the safety
of the power tool is maintained.
TO REDUCE THE RISK OF INJURY,
USER MUST READ AND UNDERSTAND IN-
STRUCTION MANUAL.
STRUCTION MANUAL.
Technical data
DTS 400 Q / DTS 400 EQ
Wattage 230
W
No load speed
15 000 rpm / 6 000 - 15 000 rpm
No. of strokes
30 000 spm / 12 000 - 30 000 spm
Sanding stroke
2.0 mm (0.079 in.)
Sanding base (delta form)
80 x 150 mm (3.1 x 5.9 in.)
Weight
1.3 kg (2.9 lbs.)
Safety llevel
/ II
Various dust created by power sand-
ing, sawing, grinding, drilling and other construc-
tion activities contains chemicals known (to the
State of California) to cause cancer, birth defects
or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
tion activities contains chemicals known (to the
State of California) to cause cancer, birth defects
or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products,
• Arsenic and chromium from chemically-treated
lumber.
The risk from these exposures varies, depending
on how often you do this type of work.
on how often you do this type of work.
To reduce your exposure to these
chemicals work in a well ventilated
area and use approved safety equip-
ment, such as dust masks that are
specially designed to fi lter out micro-
scopic particles.
area and use approved safety equip-
ment, such as dust masks that are
specially designed to fi lter out micro-
scopic particles.