Festool PI571823 사용자 설명서

13

X

Press the self-adhesive sanding accessory

onto the sanding pad [1-7].

Use only abrasives with an undamaged

Stickfix hook-and-loop coating. Before

use, check that the coating has not

been damaged by improper use (such

as overheating).

To prevent damage, PoliStick accessories (pol-

ishing sponges, polishing felt, sheepskin) must

only be used on the special polishing pad.

X

Press the self-adhesive polishing accesso-

ry onto the sanding pad [1-9].

At the extractor connector [1-5], a Festool

mobile dust extractor with an extraction hose

diameter of 27 mm can be connected.

The edge protector [1-1] reduces contact of

the sanding pad circumference with a surface

(e.g. when sanding along a wall or a win-

dow), thus preventing back-kick of the ma-

chine, or machine damage.

Observe the following instructions:
– Do not overload the machine by pressing

with excessive force! The best sanding re-

sults are achieved with moderate applica-

tion pressure. The sanding capacity and

quality are mainly dependent on the selec-

tion of the correct abrasive.

– Hold the machine with two hands, one on

the motor housing and one on the gear

head.

L

Tables A and B show the settings we rec-

ommend for different sanding and polish-

ing work.

X

Dust can be hazardous to health. Always

work with a dust extractor.

X

Always read applicable national regula-

tions before extracting hazardous dust.

click

X

Always secure the workpiece in such a

manner that it cannot move while being

machined.