Festool DTS 400 EQ 사용자 설명서

c) Disconnect the plug from the power

source before making any adjustments,

changing accessories, or storing power

tools. Such preventive safety measures re-

duce the risk of starting the power tool ac-

cidentally.
d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.
e) Maintain power tools. Check for mis-

alignment or binding of moving parts,

breakage of parts and any other condi-

tion that may affect the power tools op-

eration. If damaged, have the power tool

repaired before use. Many accidents are

caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.
g) Use the power tool, accessories and

tool bits etc., in accordance with these

instructions and in the manner intended

for the particular type of power tool, tak-

ing into account the working conditions

and the work to be performed. Use of

the power tool for operations different from

those intended could result in a hazardous

situation.

5) Service

a) Have your power tool serviced by a

qualifi ed repair person using only identi-

cal replacement parts. This will ensure that

the safety of the power tool is maintained.

TO REDUCE THE RISK OF

INJURY, USER MUST READ AND UNDER-

STAND INSTRUCTION MANUAL.

Various dust created by power

sanding, sawing, grinding, drilling and other

construction activities contains chemicals

known (to the State of California) to cause

cancer, birth defects or other reproductive

harm. Some examples of these chemicals

are:

Lead from lead-based paints,
Crystalline silica from bricks and cement

and other masonry products,

•
•

Arsenic and chromium from chemically-

treated lumber.

The risk from these exposures varies, depend-

ing on how often you do this type of work.

To reduce your exposure to these

chemicals work in a well ventilated

area and use approved safety equip-

ment, such as dust masks that are

specially designed to fi lter out micro-

scopic particles.

Technical data

Wattage 200

No load speed

5000 - 14000 rpm

No. of strokes

10000 - 28000 spm

Sanding stroke

2.0 mm (0.079 in.)

Sanding base (delta form)

80 x 150 mm (3.1 x 5.9 in.)

Weight

1.3 kg (2.9 lbs.)

Safety llevel

/ II

Symbols

V volts
A amperes
Hz hertz
W watt
~

alternating current

no load speed

Class II Construction

rpm revolutions per minute
spm strokes per minute

Intended use

The sanders are designed for sanding wood,

plastic, composite materials, paint / varnish,

fi lling material and similar materials. Metal

and materials with an asbestos content must

not be processed with these tools.
The machine is particularly suitable for pro-

cessing smaller surfaces and overhead work

because of its size, its weight and its out-

put.
The machines must not be damp nor operated

in a damp environment for electrical safety

reasons. The machines may only be used for

dry sanding.

•