Festool PAC571903 사용자 설명서

5

The appropriate Stickfi x sanding paper and Stick-

fi x sanding felt can be fastened quickly and easily 

onto the Stickfi x sanding base. 

The self-adhesive sanding material (5.2) is sim-

ply pressed onto the sanding base (5.1) and held 

safely in place by the Stickfi x sanding base velcro 

surface.

The appliance can be fi tted with three grinding 

disks (5.1) of different hardness depending on 

the surface to be treated. 
• Hard: coarse grinding on surfaces, grinding at 

edges.

• Soft: universal for coarse and fi ne grinding, for 

fl at and curved surfaces.

• Super-soft:  fi ne grinding on formed parts, 

curves, radii. Do not use on edges!

The grinding disks and the tool-holding fi xture on 

the appliance are equipped with a positive holder 

(6.1). 

 Make sure the grinding disk is correctly 

positioned before screwing it tight. 

 Never overload the tool by using 

too much pressure! The best sanding results are 

achieved when applying moderate pressure. 
The ETS 150/3 EQ gives the best surface quality 

and low abrasion. The ETS 150/5 EQ provides high 

abrasion with good surface quality. The sanding 

performance and quality depend mainly on the 

choice of the right sanding material. Festool offers 

the appropriate sanding material for all applica-

tions (see Festool catalogue or on the Internet 

under www.festool-usa.com). 
We recommend the following settings on the ro-

tary control (2.3) for electronic machines:
5 - 6
- sanding with max. drive
- sanding old paint
- sanding wood and veneer prior to painting

- interim sanding of paint on surfaces
4 - 5
- sanding of thinly applied primer
- sanding of wood with sanding vlies
- sanding edges on wooden parts
- smoothing primed wooden surfaces.
3 - 4
- sanding full wooden and veneer edges
- sanding in the grooves/rebates of windows and 

doors

- interim paint sanding on edges
- pre-sanding natural wood windows with sanding 

vlies

- smoothing wood surfaces with sanding felt prior 

to staining

- rubbing down stained surfaces with sanding 

vlies

- rubbing down or removing excess lime paste 

with sanding vlies

2 - 3
- interim paint sanding on stained surfaces
- cleaning natural wood window grooves with 

sanding felt

1 - 2
- sanding stained edges
- sanding thermoplastic synthetics

 Any maintenance or repair work re-

quiring the motor housing to be opened may only 

be carried out by an authorised service workshop. 

Maintenance or repair work carried out by an 

unauthorised person can lead to the wrong con-

nection of the power leads or other components, 

which in turn can lead to accidents with serious 

consequences. 

 Always remove the plug from the 

mains supply socket before carrying out any work 

on the machine! 
Always keep the machine and the ventilation slots 

clean.