Tandberg Data SCSI DLT-V4 Internal Black 7301708700 사용자 설명서

Chapter 2  Installing the Tape Drive

Installing the Device Drivers

DLT-V4 Product Manual

33

Click 

to install the driver. The next view completes the Wizard. 

Click 

. You may be prompted to reboot your system.

The DLT-V4 device driver is installed.

2

Make sure that you are logged on to the server or workstation with 
Administrator privileges.

Download and extract the required driver files from 

www.tandberg.com

.

The system may automatically detect the DLT-V4 tape drive and 

display the “Found New Hardware Wizard”. If the Wizard appears, 

proceed directly to 

, otherwise start the Wizard manually as 

follows:

Right-click 

, and select 

 from the drop-down 

menu. This will start the Computer Management applet.

In the left window under 

, double-click 

.

In Device Manager, the DLT-V4 tape drive will be listed under 

either “Tape drives” or “Other devices”. Locate the entry for the 

DLT-V4 tape drive. Then double-click that entry to display the 

Drive Properties. 

Click the 

 tab. Then click 

.

The “Upgrade Device Driver Wizard” will start. Proceed with 

.

In the “Upgrade Device Driver Wizard”, click 

 to continue.

Select the radio button labeled “Display a list of the known drivers 

for this device so that I can choose a specific driver”. Then click 

.

If the drive is unknown to the system, the next view is “Hardware 

Type”. Otherwise, the “Select a Device Driver” view is displayed.

If the “Hardware Type” view appears, select either “Other 

devices” or “Tape drives”. Then click 

 to continue on to the 

“Select a Device Driver” view.

In the “Select a Device Driver” view, click 

.