Festool PI571810 사용자 설명서

7

 Always remove the power plug 

from the socket before carrying out any work 

on the power tool. 

  Always connect the machine to a dust 

extractor when performing work that 

generates dust. 

You can connect a Festool extractor with an 

extractor hose diameter of 27 mm to the dust 

extraction port (4.2). 
The extraction adapter (4.3) can be removed 

if necessary. To do this, press the locking but-

ton (4.1), draw the extraction adapter back-

wards and pull off. To reattach the extraction 

adapter, insert it as shown in Fig. 4 and slide 

it towards the sanding pad until the locking 

button (4.1) latches into place.

The edge protector (5.1) prevents the sand-

ing pad from touching the edge perpendicu-

lar to a surface (e.g. when sanding along a 

wall), thereby preventing the machine from 

rebounding.
Assembly: Slide the edge protector onto the 

machine until it latches into place.

You can use the switch (6.1) to set two dif-

ferent sanding motions. 

 The change from eccentric motion 

(fi ne sanding) to Rotex rotary motion (coarse 

sanding) can only be made when the sanding 

pad is stationary, as the switch is locked in 

place during operation for reasons of safety.

  The Rotex rotary motion is a combina-

tion of rotary and eccentric motions. 

This motion is recommended for sand-

ing with aggressive material removal 

(coarse sanding) and polishing. 

Slide the switch (6.1) into the right position.