Festool PN567696 사용자 설명서

4

the power tool in unexpected situations.
f)   Dress properly. Do not wear loose clothing or 
jewellery. Keep your hair and clothing away from 
moving parts. Loose clothes, jewellery or long hair 
can be caught in moving parts.
g)   If devices are provided for the connection of 
dust extraction and collection facilities, ensure 
these are connected and properly used. Use of 
dust collection can reduce dustrelated hazards.
h)  Do not let familiarity gained from frequent 
use of tools allow you to become complacent and 
ignore tool safety principles. A careless action can 
cause severe injury within a fraction of a second.

a)   Do not force the power tool. Use the correct 
power tool for your application. The correct power 
tool will do the job better and safer at the rate for 
which it was designed.
b)   Do not use the power tool if the switch does 
not turn it on and off. Any power tool that cannot be 
controlled with the switch is dangerous and must 
be repaired.
c)   Disconnect the plug from the power source 
and/or the battery pack from the power tool 
before making any adjustments, changing acces-
sories, or storing power tools. Such preventive 
safety measures reduce the risk of starting the 
power tool accidentally.
d)   Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with 
the power tool or these instructions to operate 
the power tool. Power tools are dangerous in the 
hands of untrained users.
e)   Maintain power tools and accessories. Check 
for misalignment or binding of moving parts, 
breakage of parts and any other condition that 
may affect the power tool’s operation. If damaged, 
have the power tool repaired before use. Many 
accidents are caused by poorly maintained power 
tools.
f)   Keep cutting tools sharp and clean. Properly 
maintained cutting tools with sharp cutting edges 
are less likely to bind and are easier to control.
g)   Use the power tool, accessories and tool bits 
etc. in accordance with these instructions, taking 
into account the working conditions and the work 
to be performed. Use of the power tool for opera-
tions different from those intended could result in 
a hazardous situation.
h)   Keep handles dry, clean and free from oil 
and grease. Slippery handles do not allow for safe 
handling and control of the tool in unexpected situ-

 Various dust created by power 

sanding, sawing, grinding, drilling and other 
construction activities contains chemicals known 
(to the State of California) to cause cancer, birth 
defects or other reproductive harm. Some ex-
amples of these chemicals are:

•  Lead from lead-based paints,
•  Crystalline silica from bricks and cement and 

other masonry products,

•  Arsenic and chromium from chemically-

treated lumber.

The risk from these exposures varies, depending 
on how often you do this type of work.

 To reduce your exposure to these 

chemicals work in a well venti-
lated area and use approved safe-
ty equipment, such as dust masks 
that are specially designed to fi l-
ter out microscopic particles. Wash 
hands after handling.

ations.

a)   Have your power tool serviced by a qualifi ed 
repair person using only identical replacement 
parts. This will ensure that the safety of the power 
tool is maintained.

– Harmful/toxic dusts can be produced during 

your work (e.g. lead-containing paint, some 
types of wood and metal). Contact with these 
dusts, especially inhaling them, can represent 
a hazard for operating personnel or persons in 
the vicinity. Comply with the safety regulations 
that apply in your country. Connect the electric 
power tool to a suitable extraction system.

  To protect your health, wear a P2 protective 

mask.

  Always wear protective goggles to protect 

against sanding hazards.