Tandberg Data SCSI DLT-V4 External Black 7302709000 사용자 설명서

Chapter 2  Installing the Tape Drive

Installing the Internal SATA Tape Drive

DLT-V4 Product Manual

26

2

Before you do anything else, unpack and inspect the tape drive for 

shipping damage. If you notice any damage, report it both to the sales 

representative and to the shipping company immediately.

If there is no damage to the tape drive, select a server or workstation to 

host the tape drive, then move on to the following installation steps.

2

In the final installation stage, you install the tape drive in the server or 

workstation and connect the data and power cables.
To install the tape drive, follow these steps:

Shut down the operating system and power off the server or 

workstation.

Power off all peripheral devices, such as printers and other connected 

devices.

Remove the cover from the server or workstation as described in the 

server or workstation’s documentation.

12

Install the server or workstation’s cover, 

connect power cables to all peripheral devices, 

and apply power to the server or workstation 

and all peripheral devices.

13

Check the tape drive to make sure it is 

working properly.

Save the packing materials in case you need to move or ship 

the tape drive in the future. You must ship the tape drive in 

the original (or equivalent) packing materials or you will 

invalidate the warranty.

Do not go to step 3 until you have completed steps 

 

. Failure to follow these instructions may result 

in damage to the tape drive or other devices.