Tandberg Data SCSI DLT-V4 External Black 7302709000 사용자 설명서

Chapter 5  Using Data and Cleaning Cartridges

Data Cartridge Use and Care

DLT-V4 Product Manual

58

• Do not place data cartridges near sources of electromagnetic energy 

or strong magnetic fields, such as computer monitors, electric motors, 

speakers, or X-ray equipment. Exposure to electromagnetic energy or 

magnetic fields can destroy data on data cartridges.

• Place identification labels only in the slide-in slot on the front of the 

data cartridge.

• Never use any type of adhesive labels or “sticky” notes on data 

cartridges—they can become dislodged inside the tape drive and 

entangled in the mechanism.

• Do not use graphite pencil, water-soluble felt pens, or other debris-

producing writing instruments on your labels. Never erase a label—

replace it.

5

When the 

 LED is illuminated, your tape drive’s read/write head 

needs to be cleaned. 

Use only approved cleaning cartridges in your DLT-V4 tape drive. Use of 

any other type of cleaning cartridge can damage the read/write head in 

your tape drive.

Figure 21  DLT VS1 Cleaning 
Cartridge

Follow the instructions as detailed in 

 on page 54 to load the cleaning cartridge. The 

DLT-V4 tape drive will accept only a DLT VS1 cleaning 

cartridge. Cleaning typically takes several minutes, during 

which the 

 LED blinks. If you attempt to load an 

inappropriate type of cleaning cartridge, your DLT-V4 

tape drive prevents damage by ejecting the cartridge after 

approximately 25 seconds without allowing the cleaning 

tape to come into contact with the read/write head.