Graco Inc. 223390 전단
INSTALLATION
PARTS LIST
Follow the Pressure Relief Procedure on the first
page.
page.
See the drawing below for assembling the extension.
Before installing the spray tip, start and prime the
sprayer.
Before installing the spray tip, start and prime the
sprayer.
Install the tip in the tip guard and be sure to install the
tip gasket. Screw the tip guard firmly onto the adapter.
tip gasket. Screw the tip guard firmly onto the adapter.
NOTE:
A Reverse-A-Clean IV
t
DripLess
t
Tip
Guard may be used in place of the one
supplied with the extension.
supplied with the extension.
Flushing
Follow the flushing guidelines given in your seperate
pump instruction manual. Be sure to relieve fluid pres-
sure, and then remove the spray tip before flushing.
This reduces the risk of static sparking and splashing
fluid in the eyes.
pump instruction manual. Be sure to relieve fluid pres-
sure, and then remove the spray tip before flushing.
This reduces the risk of static sparking and splashing
fluid in the eyes.
Model 223–390
12 in. (305 mm) long
Model 223–391
18 in. (457 mm) long
Model 223–392
24 in. (610 mm) long
REF
NO. PART NO.
NO. PART NO.
DESCRIPTION
QTY
1
180–137
NUT, gun
1
2
180–136
ADAPTER, tip
1
3
166–969
WASHER, tip
2
4
220–222
TIP GUARD
1
5
EXTENSION TUBE
218–244
12 in.
for Model 223–390
1
218–245
18 in.
for Model 223–391
1
218–246
24 in.
for Model 223–392
1
ACCESSORIES
Must be purchased separately
.
SPRAY GUNS
Includes Reverse–A–Clean IV DripLess
Includes Reverse–A–Clean IV DripLess
t
Tip Guard and a SwitchTip
t
“SILVER” GUN
220–954
5000 psi (350 bar) Max. Working Pressure
SwitchTip
SwitchTip
t
is size 517.
“CONTRACTOR” GUN
220–955
3600 psi (248 bar) Max. Working Pressure
SwitchTip
SwitchTip
t
is size 517.
“BLACK MAX” GUN
220–730
3600 psi (248 bar) Max. Working Pressure
SwitchTip
SwitchTip
t
is size 513.
REVERSE-A-CLEAN
t
IV DripLess
t
Tip Guard
220–422
Uses fluid pressure to remove tip clogs. Purchase
SwitchTip
Uses fluid pressure to remove tip clogs. Purchase
SwitchTip
t
separately.
ADAPTER GUN NUTS for other guns
Use in place of 180–137.
Use in place of 180–137.
180–147
Fits Binks high pressure guns
180–146
Fits Wagner high pressure guns
TECHNICAL DATA
Maximum Working Pressure
4050 psi (280 bar)
. . . . . .
Wetted Parts
Aluminum, Plastic,
. . . . . . . . . . . . . . . . . . .
Stainless Steel, Plated Steel
Weight
223–390
6.9 oz (195 g)
. . . . . . . . . .
223–391
8.4 oz (239 g)
. . . . . . . . . .
223–392
10 oz (283 g)
. . . . . . . . . . .
Factory Branches: Atlanta, Chicago, Dallas, Detroit, Los Angeles, West Caldwell (N.J.)
Subsidiary and Affiliate Companies: Canada; England; Switzerland; France; Germany; Hong Kong; Japan
GRACO INC.
P.O. BOX 1441
MINNEAPOLIS, MN
55440–1441
PRINTED IN U.S.A.
308–011
2–90
GUN NOT INCLUDED
1
3
5
4
TIP NOT INCLUDED
3
2