Wagner SprayTech 9185G 사용자 설명서

 

13 

  •  Wrench

  •  Warm, soapy water for latex material

  •  Mineral spirits for oil based materials

  •  Replacement spray gun filter (if necessary)
ImPORTANT:  Never clean the filter by 

  1.  Peform the Pressure 

  5.  Inspect the filter for 

damage.  Replace if any 

holes or tears are found. 

  4.  Remove the filter from the 

housing.  Clean with appropriate 

cleaning solution (warm, soapy 

water for latex materials; mineral 

spirits for oil-based materials).

  2.  Pull trigger guard 

from filter housing.

  6.  Replace cleaned filter, tapered 

end first, into the gun housing.  

    Note:  It is important to place 

tapered end first to ensure proper 

sprayer operation.

  3.  Tighten the wrench over the 

wrench flats (a).  Unscrew the 

filter housing using a wrench.  

Note:  You DO NOT need to 

remove the spray hose from the gun 

to clean the filter.

  7.  Reassemble the spray gun.