Wagner SprayTech 9185G 사용자 설명서

 

8 

  •  The material you plan to spray

  •  Flat blade screwdriver

  •  Piston Oil™

  •  Waste bucket

  1.  Remove AutoOiler cap with a 

flat blade screwdriver.  

    Squirt Piston Oil into the 

AutoOiler.  Replace cap.

  2.  Push AutoOiler button 2-5 times 

to lubricate the fluid section.  

    Press button 2-3 times before 

every use.  Be sure to check 

reservoir level (a) and refill as 

necessary.

  5.  Turn the PRIME/SPRAY 

knob to PRIME.

  4.  Place a full container 

of spraying material 

underneath the suction 

tube (a).  

    Hold the return tube into a 

waste container (b).

  6.  Attach the supplied 

grounding wire to a 

grounded object.  

    Start the engine (see 

directions on page 4).

  7.  Increase the pressure to 

maximum (+).

  8.  Shut the engine off.  Place 

return tube back into 

material container and clip 

return tube and suction tube 

together.

  3.  Fully depress the Sureflo valve 

to make sure the inlet ball is 

free.