Grizzly G8688 사용자 설명서
-14-
Model g8688 (Mfg. 3/09+)
the lathe should be mounted or placed on a
strong well lit workbench of sufficient height so
that you do not need to bend your back to per-
form normal operations.
strong well lit workbench of sufficient height so
that you do not need to bend your back to per-
form normal operations.
To bolt the lathe to your workbench:
1. remove the four M6-1 screws that secure the
rubber feet and chip tray to the machine (if
already fitted.)
already fitted.)
2. use the diagram shown in figure 7 as a
drill pattern to drill your holes into your work-
bench.
bench.
the rubber feet are attached to two metal brack-
ets. the feet and the brackets bolt through the
chip tray and into the base of the lathe.
ets. the feet and the brackets bolt through the
chip tray and into the base of the lathe.
To attach the rubber feet:
1. remove the four phillips head screws from
the bottom of the chip tray.
2. attach the two brackets with the screws you
removed in
step 1 (see figure 8).
figure 8. installing the feet.
Moving & placing
Mini Lathe
The Model G8688
is a
heavy machine. DO NOT
over-exert yourself while
unpacking or moving
your machine—get assis-
tance.
3. use the appropriate length M6-1 bolts with a
flat washer to secure the lathe and chip tray
to the workbench.
to the workbench.
figure 7. g8688 drill pattern.
72mm
475mm
5
⁄
16
"