Parkside PDS 200 A 사용자 설명서

11 

GB/IE/CY

j

   Press the ON / OFF switch 

9

 into the „1“ po-

sition to switch the device on and run it at a 
constant speed 

j

   Press the ON / OFF switch 

9

 into the „0“ po-

sition to switch the device off.

j

   Switch on the machine as described above.

j

   To grind metal tools or metal items, place the 

workpiece on the workpiece/tool rest 

5

 and 

slowly bring it up to the grinding wheel 

4

.

j

   Press the workpiece carefully against the grind-

ing wheel 

4

. Pressing too hard can overload 

the device. When grinding always use the cir-
cumferential end face (not the sides) of the 
grinding wheel only (See Figures D, E, F).

Attention! Before carrying out any tasks on the 
device itself and when you are not using the de-
vice, always pull the mains plug out of the mains 
socket.

J

   Do not use damaged grinding wheels. 

J

   Only use grinding wheels with details that cor-

respond with those given on the device rating 
plate. The circumferential speed should be 
equal to or greater than the value given on the 
device rating plate.

j

   Only grinding wheels with markings indicating 

the manufacturer, the type of adhesive, dimen-
sions and permitted circumferential speed are 
to be used. If you install new grinding wheels 
carry out a ringing test before use. Grinding 
wheels in good condition give a clear ringing 
noise when struck lightly with a plastic hammer. 

1)   Take off the outer part of the wheel guard cov-

er 

7

 by unscrewing the 3 threaded fixings 

(see Figs. N, O).

2)   Release the nut 

13

 and then remove the out-

side flange 

12

.

3)   Now replace the grinding wheel and reassem-

ble all the components in the reverse order. 
Take note that the left-hand side of the double 
grinding machine has a left-hand thread 

11

 

and the right-hand side has a right-hand 
thread. This ensures that the nuts can only be 
screwed off in the direction of rotation of the 
spindle.

j

   Use only the supplied flanges to mount the 

grinding wheels.

Note: The grinding wheels are fitted with 
a ½“ adapter so that they can be used 
with grinding wheels purchased later 
with either a ½“, or a 20 mm bore. 
Grinding wheels are available in various 
grit grades and hardnesses.
The central fixing holes in grinding wheels must not 
be redrilled.

J

   Use only the accessories and attachments de-

tailed in the operating instructions. The use of 
inserted tools or accessories other than those 
recommended in the operating instructions 
could lead to you suffering an injury.

Attention! Before carrying out any tasks on the 
device itself and when you are not using the device, 
always pull the mains plug out of the mains socket.

The device is largely maintenance-free.

j

   Clean the device frequently. For best results, 

clean the double grinding machine immediate-
ly after you have finished using it.

j

   Do not allow any liquids to enter the device. 

Use a dry cloth to clean the device.

j

   Do not under any circumstances use petrol or 

Preparing for first use / Maintenance and cleaning