Echo SRM-280T 사용자 설명서

17.  Place inner throttle cable in large hole of carburetor swivel (D). 
18.  Loosen nuts (C) and place threaded end of throttle linkage in 

bracket slot. Finger tighten nuts (C).

19.  Check throttle for freedom of movement and that wide open 

throttle / low idle extremes are adjusted properly. If adjustment 

cannot be achieved with adjusting nuts (C), consult with your 

Echo Dealer for correct adjustment procedure. Tighten nuts (C).

20.  Connect 2 ignition stop leads (A,B) from throttle cable tubing to 2 

ignition leads (A,B) on engine.

21.  Gather ignition wires and position behind air filter case. 

22.   Install air filter and cover

1.  Attach hip pad to harness as shown.