Zenoah EHT602D 사용자 설명서

GB-15

eHT752S / eHT602D

1. Remove the muffler, insert a screwdriver into the vent,

and wipe away any carbon buildup. Wipe away any
carbon buildup on the muffler exhaust vent and cylin-
der exhaust port at the same time.

2. Tighten all screws, bolts, and fittings.

3. Check to see if any oil or grease has worked its way

in between the clutch lining and drum, and if it has,
wipe it away using oil-free, lead-free gasoline.

1. Oil the blade to prevent rust.
2. Empty the fuel tank and put the cap back on.
3. Remove the spark plug, pour a small amount of oil

into the cylinder.

4. Rotate the crankshaft several times using the start-

ing rope in order to distribute the oil. Put the spark
plug back in.

5. Wrap the engine with a plastic sheet.
6. Store the trimmer indoors in a dry place, dust free

place, out of the reach of children, preferably not in
direct contact with the floor and away from heat
sources.

When disposing your machine, fuel or oil for the machine,
be sure to allow your local regulations.