Husqvarna 124L 사용자 설명서
12
ASSEMBLY
F
itting the trimmer guard and
trimmer head
S
Fit the correct trimmer guard (A) for use
with the trimmer head. Hook the trimmer
guard/combination guard onto the fitting on
the shaft and secure with the wing nut (B).
with the trimmer head. Hook the trimmer
guard/combination guard onto the fitting on
the shaft and secure with the wing nut (B).
NOTE:
Make sure unit is assembled cor-
rectly as shown in this manual.
Fitting the loop handle
S
Position the handle on the shaft. Note
that the handle must be mounted be-
tween the two arrows on the shaft.
that the handle must be mounted be-
tween the two arrows on the shaft.
S
Fit the screw, securing plate and wing
nut as shown in the diagram.
nut as shown in the diagram.
S
Tighten the wing nut.
A
B
S
Turn the shaft until one of the holes in the
dust cup aligns with the corresponding
hole in the gear housing.
dust cup aligns with the corresponding
hole in the gear housing.
S
Insert a small screwdriver (C) into the
aligned holes to lock the shaft.
aligned holes to lock the shaft.
S
Screw on the trimmer head (D) in the op-
posite direction to the direction of rota-
tion.
posite direction to the direction of rota-
tion.
D
S
To dismantle, follow the instructions in
the reverse order.
the reverse order.
C