Polycom 2000 사용자 설명서
Appendix H-Setting the RMX for Integration Into Microsoft OCS Environment
H-20
6
View or modify the following fields:
7
Click OK.
Table 1
Management Network Properties – DNS Parameters
Field
Description
MCU Host Name
Enter the name of the MCU on the network. This
name must be identical to the FQDN name defined
for the RMX in the OCS and DNS.
Default name is RMX.
name must be identical to the FQDN name defined
for the RMX in the OCS and DNS.
Default name is RMX.
Shelf Management
Host Name
Host Name
Displays the name of the entity that manages the
RMX hardware. The name is derived from the MCU
host name. Default is RMX_SHM.
RMX hardware. The name is derived from the MCU
host name. Default is RMX_SHM.
DNS
Select:
•
Off – if DNS servers are not used in the network.
•
Specify – to enter the IP addresses of the DNS
servers.
servers.
Note: The IP address fields are enabled only if
Specify is selected.
Specify is selected.
Register Host
Names
Automatically to
DNS Servers
Names
Automatically to
DNS Servers
Select this option to automatically register the MCU
Signaling Host and Shelf Management with the DNS
server.
Signaling Host and Shelf Management with the DNS
server.
Local Domain
Name
Name
Enter the name of the domain where the MCU is
installed as defined in the OCS.
installed as defined in the OCS.
DNS Servers Addresses:
Primary Server
The static IP addresses of the DNS servers (the
same servers defined in the OCS).
A maximum of three servers can be defined.
same servers defined in the OCS).
A maximum of three servers can be defined.
Secondary Server
Tertiary Server