Tascam D01175220A DP-006 사용자 설명서

4.  In order to use the built-in MIC B to record the guitar to stereo TRACK 3, 

use the DATA wheel to set the input source for IN B (INPUT B) to INT 
MIC B-Low

, INT MIC B-Mid or INT MIC B-High. (See “Selecting 

5.  After completing the setting, press the HOME button to return to the 

Home Screen.

INT.MIC X-Low

, INT.MIC X-Mid and INT.MIC X-High (X is A 

or B) settings change the sensitivity of the built-in mics. Set according to 

If you are not sure which setting to use, choose INT.MIC X-Low. If the 

input level is still too low after adjusting it, return to INPUT SETTING 

screen and change the setting to INT.MIC X-Mid. If the input level is 

still not high enough, change the setting to INT.MIC X-High.

Set the MODE item on the INPUT SETTING to monitor the input 

signals. (See “Setting the monitoring mode” on page 52.)

When the recorder is stopped, press the ASSIGN button to open the INPUT 
ASSIGN

 screen. By default the recording sources are assigned to the tracks as 

shown below.

Recording track Recording source Default value 
TRACK 1

IN A

TRACK 2

IN B

TRACK 3

IN A-B

TRACK 4

IN A-B

Since you set internal MIC A as the input source for INPUT A and internal MIC 

B as the input source for INPUT B on the INPUT SETTING screen in the 

previous “Setting the internal mics as input sources” section, signals from MIC 

A and MIC B will be recorded to TRACK 3.
So, in this example, you do not need to change the input source assignment 

settings to use the internal mics to record the rhythm guitar to TRACK 3.