Tascam D01175220A DP-006 사용자 설명서

다운로드
페이지 104
28 
TASCAM  DP-006
2 – Quick Start Guides
3.  Press the F4 [EXEC] button. 
 
After a Master Play! pop-up message appears, the unit enters 
master play mode and the Home Screen reopens.
NOTE
• 
When in master play mode, MASTER PLAY appears highlighted at the 
top left of the Home Screen.
• 
If you have not made a stereo master track, you will not be able to put the 
unit into MASTER PLAY mode.
4.  In this state, you can press the Play (7) button to play back the stereo 
master track.
Transferring the stereo master track to a 
computer
After creating a stereo master track following the procedures in “Creating 
stereo master tracks” on page 72, you can transfer it to a computer 
connected using the included USB cable. For instructions about how to 
transfer the stereo master track to a computer, see “12 – Exchanging Data with 
Shutting down
When you are done using the unit, shut it down.
1.  Press the HOME button to show the Home Screen.
2.  Press and hold the 
 button until POCKETSTUDIO appears on the 
display.
 
The power turns OFF automatically after the unit completes its shutdown 
process, including saving various information from your session.
 
Always follow the above procedures to shut down the unit properly.
CAUTION
Do not remove the batteries or disconnect the power cord, for example, 
to turn the power OFF. If you do so, the unit cannot shut down properly 
and all recording data and settings that had been made since the last 
shutdown or song saving operation will be lost. Lost data and settings 
cannot be restored.