Moxa Technologies AWK-1200-AP 사용자 설명서
MOXA AirWorks AWK-1200-AP User’s Manual
Web Console Configuration
3-5
This option enables configuration of an optional second RADIUS server. A second RADIUS
server can be used as backup for the primary RADIUS server. The second RADIUS server is
consulted only when the primary server is not available or not responding. The fields Second
RADIUS Server IP Address, RADIUS Server Port, Second RADIUS server Shared Secret,
Second MAC Address Authentication provide the corresponding parameters for the second
RADIUS Server.
server can be used as backup for the primary RADIUS server. The second RADIUS server is
consulted only when the primary server is not available or not responding. The fields Second
RADIUS Server IP Address, RADIUS Server Port, Second RADIUS server Shared Secret,
Second MAC Address Authentication provide the corresponding parameters for the second
RADIUS Server.
Advanced
MAC Address Filter
The MAC address filter section can be used to filter network access by machines based on the
unique MAC addresses of their network adaptor(s). It is most useful to prevent unauthorized
wireless devices from connecting to your network. A MAC address is a unique ID assigned by the
manufacturer of the network adaptor.
The MAC address filter section can be used to filter network access by machines based on the
unique MAC addresses of their network adaptor(s). It is most useful to prevent unauthorized
wireless devices from connecting to your network. A MAC address is a unique ID assigned by the
manufacturer of the network adaptor.
Enable MAC Address Filter
When this is enabled, computers are granted or denied network access depending on the mode of
the filter.
When this is enabled, computers are granted or denied network access depending on the mode of
the filter.
NOTE
Configuring this feature incorrectly could prevent machines from accessing the network. In this
case, you can regain access by activating the factory defaults button on the Access Point itself.
case, you can regain access by activating the factory defaults button on the Access Point itself.