Siemens L-850D/E F-Range Style 2 Inset Lights 사용자 설명서

L-850D/E F-Range Style 2 Inset Lights 

Servicing in Maintenance Base



 2002 Siemens Airfield Solutions, Incorporated

96A0266D

24

All rights reserved

Issued 2/02

To replace the optical assembly, proceed as follows (for the tools to use, refer to
page 43 “Screws Overview”):

Remove the lamp(s) as explained on page 22.

Remove the optical assembly by loosening the screws (D5).

Position the new optical assembly with new dampers (D6).

Make sure that the new optical assembly bears the same three-character
identification as the one to replace. This identification number is visible
when the optical assembly is properly installed.

Torque down the fixing screws (D5).

Refer to the table “Screws Overview” on page 43 for the tool to use, the
torque to apply, and the eventual use of “Loctite” sealing compound.

Reinstall the lamp(s) as described on page 22.

Identification number