Philips HF3480 사용자 설명서

Follow steps 1 to 5 in section ‘Middle dial’ in this chapter.

You can choose one of the following sounds:

 - Radio (Fig. 12)

 - Birds (Fig. 13)

 - Beep (Fig. 14)

 - African jungle (Fig. 15)

 - Wind chimes (Fig. 16)

 1 

 Push down the control lever to the bottom position when the 

alarm goes off.  (Fig. 17)

 

, The lamp continues to be on at the selected intensity level, but the 

alarm sound stops. After 9 minutes, the wake-up sound is 

automatically played again.

If you want to get a quick demonstration (60 seconds) of the gradually 

increasing light level and sound level, activate the test function of the 

appliance.

 1 

 Push the control lever down to the bottom position for a few 

seconds until TEST appears on the display (Fig. 18).

 2 

 Push the control lever down again to stop the demonstration.

You can use the top dial to switch on the lamp as a bedside lamp and to 

set the light intensity.

 1 

 To switch on the lamp, press the top dial gently and release 

it.   (Fig. 19)

13