Fluke 187 사용자 설명서
Model 187 & 189
Users Manual
Users Manual
5-8
Returning to Factory Defaults
Your meter comes with the setup options preset at the
factory. These factory settings are shown in Tables 5-1
and 5-2. You can always return to these settings as
follows:
factory. These factory settings are shown in Tables 5-1
and 5-2. You can always return to these settings as
follows:
1. Press
O
T
until
Fcty
appears in the display.
2. Press
%
to select
yE5
; press
T
to select
no
.
If you select
yE5
, all setup options revert to the
factory defaults; you cannot specify individual
choices.
choices.
3. Press
O
T
to exit the setup procedure and
activate your selection.
If you selected
yE5
in step 2, all factory settings are
restored.
If you selected
no
, selections made in the Setup
mode become active.
Saving Setup Options
At each setup option, store your choice and advance to
the next option by pressing
the next option by pressing
O
T
.
If you are storing the last option, this also exits the setup
mode.
mode.
To exit the Setup mode without saving the present option,
press
press
O
N
(CANCEL).
Selections that were previously saved with
O
T
are
retained.