Lg Electronics LDF6810ST 사용자 설명서
15
C
C
A
AR
RE
E &
& M
MA
AIIN
NT
TE
EN
NA
AN
NC
CE
E
CARE
&
MAINTENANCE
For best results, it is important to periodically check and care for the filters and spray arms.
WARNING :
To prevent any possible injury during care and maintenance / cleaning, be sure to wear
gloves or protective clothing.
gloves or protective clothing.
Cleaning metallic parts
With a cloth or sponge, you can clean some parts
such as exterior or interior parts.
Stainless steel tub has a tendency to build up cloudy
film on its surface especially when using hard water.
such as exterior or interior parts.
Stainless steel tub has a tendency to build up cloudy
film on its surface especially when using hard water.
Cleaning Spray Arms
- Lower Spray Arm
�
�
Check that the water jet holes are not blocked by
food particles.
food particles.
�
When cleaning is necessary, remove the Spray arm
by pulling up.
by pulling up.
�
Clean the spray arm and replace it by pushing down.
- Top Spray Arm
�
�
Make sure the water jet holes are not blocked by
food particles.
food particles.
�
When cleaning is necessary, remove the arm by
disassembling the hook from the bracket which
holds the Top Spray Arm assembly to the tub.
disassembling the hook from the bracket which
holds the Top Spray Arm assembly to the tub.
�
Clean the spray arm and replace it.
Maintenance by seasons
- To prevent possible problems, be sure to follow
procedures below.
- During the summer season If you are absent for
extended periods of time, it is recommended that you
close the water valve and unplug power cord.
close the water valve and unplug power cord.
- During the winter season, if room temperature where
dishwasher is located is exposed to freezing, it is
recommended that you winterize the water supply
lines and product itself.
recommended that you winterize the water supply
lines and product itself.
- Upper Spray Arm
�
�
Pull the upper rack forward. Make sure the water
jet holes are not blocked by food particles.
jet holes are not blocked by food particles.
�
When cleaning is necessary, remove the arm by
unscrewing the nut.
unscrewing the nut.
�
Clean the spray arm and replace it in the reverse
order. Make sure the nut is tight!
order. Make sure the nut is tight!