Sweex Broadband Router RO001 매뉴얼

Start the internet browser and enter the following in the address line: http://192.168.123.254 
For security reasons, the router has a password. This password is: admin. Click "OK". The password can be changed and we advise you to do so.
The status screen appears first. On the left-hand side in the menu, you can select the "Wizard" option. Then click on "Next". You will see the screen
below. Sweex has created a number of presets. Select one of these presets or choose "manual configuration" in order to set the modem manually.

For certain providers, the configuration of the Sweex Broadband Router requires a so-called MAC address. A MAC address is the unique number of
the network card. With the "clone MAC address" you can send this address to the router quickly. You can trace this number as follows after which
you can manually enter it.

Go to the "Start", select 'Run' and type: WINIPCFG. Then press Enter. A window with the title IP Configuration will appear. Here you must select
the network card (Note!, this is not an NDIS adapter or PPP adapter!). Now carefully copy the adapter address.

Go to the "Start", select 'Run' and type: CMD. Press Enter and a Command window will appear. Enter the following command: IPCONFIG /ALL and
press Enter. A list of technical details will appear; of this data, write down the Physical Address of the LAN connection.

All articles that are carried under the name Sweex have a 3-year term of guarantee. Only the Sweex Digital photo and video cameras have a 2-
year term of guarantee. We do not provide support or warranty for the supplied software or (rechargeable) batteries.

Settlement of guarantee only takes place via the dealer where you have purchased the product in question.

5

RO001_manual_inside  02-09-2005  16:30  Pagina 5