Smeg CB61VES 사용자 설명서

 

 

 

 

  Remove the pan stands and wash them in warm water with a non-abrasive detergent, taking care to 

remove all deposits. Put them back on the hob. 
The continuous contact between the pan stands and the flame may cause deterioration in the 
enamel in the areas exposed to heat over time. This is an absolutely natural phenomenon which 
does not impair this component's operation at all. 

 

 

 

 

  The burner caps and flame diffuser rings can be removed for easier 

cleaning; wash them in hot water and non-abrasive detergent, taking 
care to remove all deposits, and wait for them to dry completely.  

 

 

 

 

  WARNING: never wash these components in the dishwasher. 

 

 

 

 

  Replace the flame diffuser rings, checking that they are correctly in place 

with their respective burner caps, making sure that the holes A in the 
flame diffusers are aligned with the plugs and thermocouples. 

 

 

 

 

 For best performance, on the relevant models the ignition plugs and 

thermocouples must always be kept thoroughly clean. Check them frequently 
and if necessary clean them with a wet cloth. Remove any dry residues with a 
wooden toothpick or a needle. 

 

 

 

 

  To keep the oven in good condition, it must be cleaned regularly, after allowing it to cool down. 

 

 

 

 

 

 Clean the oven shelves with hot water and non-abrasive detergents, rinse and dry. 

 

 

 
 

  The glass in the door should always be kept thoroughly clean. Use absorbent kitchen roll; remove 

stubborn dirt with a damp sponge and ordinary detergent.