Smeg PA106SX 사용자 설명서
Instructions for the user
17
8 USING THE HOB
Check that the flame crowns, the burner caps and grids are
correctly assembled. Pins
correctly assembled. Pins
A of the flame crowns must be
inserted in housings
B of the burner rings, and pins C on the grids must be
blocked in their respective housings on the hob.
blocked in their respective housings on the hob.
8.1 Ignition of the burners
The device is fit with electronic ignition. Simply press and simultaneously turn the
knob counter-clockwise on the low flame symbol , until the burner is ignited.
The burner might go off when the knob is released. In this case repeat the aforesaid
operation keeping the knob pressed for more than 2 seconds.
The burner might go off when the knob is released. In this case repeat the aforesaid
operation keeping the knob pressed for more than 2 seconds.
Should the burners go off accidentally in the models with valves, a safety device will
trip after approximately 20 seconds to block the gas outlet even if the cock is open.
trip after approximately 20 seconds to block the gas outlet even if the cock is open.
8.2 Practical advice for using the burners
For better burner performance and minimum gas consumption, flat
bottomed, even pans must be used, with covers and proportional in
size to the burners (see paragraph “8.3
size to the burners (see paragraph “8.3
Diameter of pans”).
To avoid overcooking or damage to the surface top while cooking,
all pans or griddles must be positioned within the cooking hob
perimeter and must be at a minimum distance of 3-4 cm from the
knobs.
8.3 Diameter of pans
Ø min. and max. (in cm)
BURNERS
1
Auxiliary
7-18
2
Semi rapid
10-24
3
Medium rapid
18-24
4
Large rapid
20-24
5
UR
20-28