Samsung SNH1010N 사용자 설명서

10 · English

Plug in the power cable and arrange the cables through  the bracket 

holes.

5.

Adjust the camera’s shooting angle as appropriate (left and right) and 

tighten the screws on the bottom of the bracket.

You can also use a coin or flat-head screwdriver to tighten them.

Adjust the camera’s shooting angle (top 

and bottom).

Do not put excessive force. Otherwise, it 
may cause damage to the camera.
If you use the camera in contact with the 
base unit, this may cause noise on the 
video. It is advisable to use the camera in a 
5º to 10º tilt.

3.

4.

When done, remove the protective film from the lens.