AEG 6510K7-M 사용자 설명서

6

The ceramic glass surface has four 
cooking zones. When a zone is 
turned on, it will illuminate at 
various intervals depending on the 
heat setting selected. Even at the 
highest setting the zone is 
disconnected occasionally to ensure 
that the surface is not over-heated.
The glass is hard, and has been 
tempered to withstand heat, cold 
and temperature shocks. But like all 
glass it is sensitive to impact. Do 
not stand on the ceramic glass 
surface.
At the front of the ceramic 
glasssurface in the middle there are 
four fields. Each field corresponds 
to a cooking zone. When using a 
zone, the field concerned will show 
which CHEC function you are 
using and the setting at which you 
have set the zone.

There are two single zones and two 
double zones.

Information about how to use the 
CHEC control function can be 
found in the section entitled 
“Operation instructions”. The 
CHEC control function allows 
electronic control of the zones. 
CHEC control enables you to set 
the heat with great precision, which 

means that you do not have to 
adjust the heat constantly. CHEC 
control provides the zones with the 
following functions:

          Automatic disconnection of 
          “forgotten” zones.
          AUTOMAX at all settings.
          Setting of large zone on 
          double zones.
          Child safety device on zones.

When you switch off a zone, an 
"H" in the display indicates that the 
zone is still hot. The residual heat 
indicator will continue to be 
illuminated until the zone reaches a 
temperature of approx. 80˚C.