Lincoln 3255 사용자 설명서

Impinger 3255 – Operator Manual 

11

 
 

 
 
 

 

 
The finger housing has a baffle mounted inside to balance the air flow to the rear and front of the oven.  If the 
product is cooking more or less in the rear of the oven than in the front, it is possible the finger housing baffle needs 
to be adjusted.  If it is deemed necessary to adjust the air balancing baffle, be sure to adjust all ten (10) finger 
housing to exactly the same opening.  Determine if more air (heat) is required at front or rear of oven then open or 
close off that air by bending the baffle in the proper direction.  For additional information on how to adjust the Finger 
Housing Baffle Plate, contact the Lincoln Technical Service Department at (800) 678-9511. 

 

10. Install finger in the oven by sliding 

it over the plenum flange and 
setting the front bracket. BE SURE 
THAT THE FINGER SETS 
SQUARELY OVER THE PLENUM 
FLANGES AND THE HOLES 
POINT IN THE PROPER 
DIRECTION. Top fingers point 
down, bottom fingers point up. 

11. Repeat step 10 until all ten (10)

fingers are installed.  

 
 

Install conveyor and crumb pans 
before operation. See page 17 for 
conveyor installation instructions. 

12. Attach Motor Cover as shown with 

bolts provided.